Skip to content
TuneSplit

AI mastering free online, right in your browser

Drop your mix to master itFree · runs in your browser · up to 10 min · MP3, WAV, M4A · no sign-up
Private: mastered on your device, nothing uploaded.Free · unlimited · no watermark · WAV or MP3 320

Drop your mix, choose a sound and a loudness target, and get a mastered track back in seconds: EQ, glue compression, loudness to the LUFS you pick and a peak limiter. Compare before and after, see the measured numbers, download WAV or MP3.

One prompt · two takes · tap to play

“Upbeat indie pop, bright female vocal, warm synths, claps, summer road trip feeling,…”

Take A · MiniMax Music v22:30 · made in 94 s
Take B · ACE-Step1:44 · made in 27 s
Split any take into stemsVocals · drums · bass · other →

More tools for finishing a track

TuneSplit's AI mastering masters a song for free in your browser. Drop an MP3, WAV or M4A mix, pick a sound (Balanced, Warm, Bright, Punchy) and a loudness target (-14 LUFS for streaming, -9 for loud, -16 for gentle), press Master and compare before and after with the measured LUFS and peak. Download WAV or MP3 320. There is no sign-up, no watermark, no daily limit and nothing is uploaded, for tracks up to 10 minutes.

Free conditions at a glance

The exact rules, from the same settings the tool uses.

ConditionFree, no sign-up
Sign-upNot required: no account, no email, no card
Free per dayUnlimited: mastering runs on your own device, so there is no daily count
LengthTracks up to 10 minutes
ExportWAV (16-bit, original sample rate) or MP3 320 kbps
WatermarkNone, and no low-quality preview: the download is the full master
SubscriptionNot required, nothing to buy for mastering
PrivacyYour audio never leaves the browser; nothing is uploaded or stored
Commercial useTuneSplit claims no rights on your track; release the master however you like

What the mastering chain does

  1. Clean low end: a gentle high-pass at 30 Hz removes rumble that eats loudness.
  2. Tone: low shelf, presence and air EQ set by the sound you pick (Warm adds body, Bright adds presence and air, Punchy adds weight and tighter compression).
  3. Glue: a slow-attack compressor evens out the mix so it sounds more finished.
  4. Loudness: the track is measured in integrated LUFS (ITU-R BS.1770, the same method streaming services use) and brought to your target.
  5. Ceiling: a look-ahead peak limiter keeps every sample under -1 dBFS so the file does not clip when encoded to MP3 or AAC.

After mastering the tool shows the measured loudness and peak of both versions, so you can check the numbers instead of trusting a meter you cannot see.

Which loudness should I choose?

TargetUse it forWhat happens on streaming
Streaming (-14 LUFS)Spotify, YouTube, Tidal and Amazon play at about this levelPlayed at about this level with no change
Loud (-9 LUFS)Club, SoundCloud, beats and EDM; streaming services will turn it downTurned down to about -14 LUFS, so it plays no louder, only more compressed
Gentle (-16 LUFS)Apple Music, acoustic, jazz, podcasts with musicPlayed as is on most services; Spotify may raise it slightly

If you are not sure, choose Streaming (-14 LUFS). Louder masters do not sound louder on Spotify or YouTube, because those services turn them down; they only lose punch.

Real measurements

Example tracks from this site, mastered with the default sound (Balanced) at each target in Chrome on a desktop computer, unedited. LUFS is integrated loudness, peak is sample peak in dBFS. Each master took a second or two, and every result landed within 0.3 LU of its target with no peak above -1 dBFS; two of the originals were clipping above 0 dBFS before mastering.

TrackBeforeStreaming -14Loud -9Gentle -16
Example band mix (1:00)-16.3 LUFS, peak -1.6-14.0 LUFS, peak -1.0-9.2 LUFS, peak -1.0-16.0 LUFS, peak -1.0
Paper Boats, acoustic pop (1:29)-11.0 LUFS, peak +0.2 (clipping)-14.0 LUFS, peak -1.0-9.3 LUFS, peak -1.0-16.0 LUFS, peak -2.7
Lo-fi study beat (1:59)-14.6 LUFS, peak -0.8-14.0 LUFS, peak -1.1-9.3 LUFS, peak -1.0-16.0 LUFS, peak -3.1
Late Shift, synth pop (1:07)-11.5 LUFS, peak +0.2 (clipping)-14.0 LUFS, peak -1.5-9.3 LUFS, peak -1.0-16.0 LUFS, peak -3.5

TuneSplit vs other online mastering

TuneSplitTypical online mastering service
AccountNoneAccount needed for the full download
PriceFree, unlimitedFree preview, then per track or subscription
Where it runsIn your browser, nothing uploadedUploaded to their servers
Loudness targetYou pick -14, -9 or -16 LUFSOften a vague intensity slider
Before/after numbersMeasured LUFS and peak shownRarely shown
EngineAutomatic EQ, compression, loudness and limiterLarger trained models, reference-track matching on some

Honest note: big services can match a reference track and adapt more to each genre. If your mix is already balanced, a clean, correctly loud master like this one is what most releases need, and you can try as many versions as you like for free.

Tips for a better master

  • Fix the mix first: mastering cannot rebalance a vocal that is too quiet or a bass that is too loud. For that, split the stems and remix.
  • Leave headroom: export the mix peaking around -6 to -3 dBFS, with no limiter on the master bus.
  • Compare at equal volume: louder always sounds better at first. Turn the After player down to judge the tone fairly.
  • Master the WAV, not an MP3, when you have it: every lossy step loses detail.
  • For an album, use the same sound and target on every track so they sit together.

Limits

  • Tracks up to 10 minutes. Very long files can be slow on phones; a computer browser is faster.
  • Stereo or mono in, same channels out. No stem mastering and no reference-track matching.
  • WAV export is 16-bit at the file's sample rate; MP3 is 320 kbps.

Frequently asked questions

Is AI mastering really free here?

Yes. Mastering runs in your browser, so there is no account, no daily limit, no watermark and nothing to buy. Tracks up to 10 minutes, WAV or MP3 320 download.

Is my song uploaded?

No. The file is decoded, processed and encoded on your own device. Nothing is sent to a server, which also makes it safe for unreleased music.

What loudness should I master to for Spotify?

About -14 LUFS integrated with peaks under -1 dBFS. Choose Streaming (-14 LUFS) in the tool. Spotify, YouTube and Tidal turn louder tracks down to roughly this level.

Is this the same as LANDR or eMastered?

It does the same job, automatic mastering of a finished mix, with a simpler chain: EQ, compression, loudness to the LUFS you choose and a peak limiter. The difference is that it is free, unlimited, needs no account and does not upload your music.

Can I master a song made with an AI music generator?

Yes. Drop the MP3 or WAV from any generator. Choose Streaming for uploads, or Loud if the track sounds quiet next to others.

Why does my master sound quieter than the original?

If the original was already louder than the target, mastering brings it down to the level you picked. Choose Loud (-9 LUFS) if you want it loud, but streaming services will turn it down again.

Can I fix the mix balance with mastering?

Only a little, with the sound presets. To change the level of vocals, drums or bass, split the song into stems with the stem splitter, adjust them, then master the new mix.

Related tools